Ivoclar Vivadent Programat P510 Ceramic Furnace
Description:
The Programat P510 combines high-tech and modern design in a very efficient and user-friendly furnace.
The intelligent Programat with infrared technology speeds up the firing process up to 25 per cent and enhances the firing results. The size or the number of restorations in the firing chamber is irrelevant. The new thermal imaging camera automatically controls the predrying and closing process.
The Programat P510 is operated by means of the large 7-inch colour touch screen and the proven membrane-sealed keypad. In addition to the many Ivoclar Vivadent programs, which are coordinated with materials such as IPS e.max, IPS d.SIGN, IPS InLine and IPS Empress, the furnace features 500 individual programs.
The QTK2 muffle technology represents a further innovation. It is responsible for ensuring homogeneous heat distribution and a prolonged life cycle of the heating element. Finally, the new vacuum pump control system with double valve technology ensures noiseless and power-saving operation.
Advantages
-Integrated infrared thermal camera ensures an optimum predrying process
-Large colour touch screen and proven membrane-sealed keypad
-QTK2 muffle technology with SiC bottom reflector
-Automatic double-range temperature calibration (ATK2)
-Remote diagnostics via Internet, e-mail and data log files
-OSD display of operating and progress status
-Power-saving technology
-Programat WLAN Kit for wireless data transfer (software updates, PrograBase x10)
-Selection of three different operating modes (normal, protected, production)
-Large cooling tray
-Multimedia functions (video player, MP3 player, photo viewer)
-Integrated timer
The Programat P510 combines high-tech and modern design in a very efficient and user-friendly furnace.
The intelligent Programat with infrared technology speeds up the firing process up to 25 per cent and enhances the firing results. The size or the number of restorations in the firing chamber is irrelevant. The new thermal imaging camera automatically controls the predrying and closing process.
The Programat P510 is operated by means of the large 7-inch colour touch screen and the proven membrane-sealed keypad. In addition to the many Ivoclar Vivadent programs, which are coordinated with materials such as IPS e.max, IPS d.SIGN, IPS InLine and IPS Empress, the furnace features 500 individual programs.
The QTK2 muffle technology represents a further innovation. It is responsible for ensuring homogeneous heat distribution and a prolonged life cycle of the heating element. Finally, the new vacuum pump control system with double valve technology ensures noiseless and power-saving operation.
Advantages
-Integrated infrared thermal camera ensures an optimum predrying process
-Large colour touch screen and proven membrane-sealed keypad
-QTK2 muffle technology with SiC bottom reflector
-Automatic double-range temperature calibration (ATK2)
-Remote diagnostics via Internet, e-mail and data log files
-OSD display of operating and progress status
-Power-saving technology
-Programat WLAN Kit for wireless data transfer (software updates, PrograBase x10)
-Selection of three different operating modes (normal, protected, production)
-Large cooling tray
-Multimedia functions (video player, MP3 player, photo viewer)
-Integrated timer
$
3,150.00
Ivoclar Vivadent Programat P310 Ceramic Furnace
Description:
With its compact design, the Programat P310 focuses on the essentials and is therefore the optimal furnace for the daily lab routine.
Thanks to the new colour touch screen and the proven membrane-sealed keypad, this furnace has become even simpler to operate than those of the previous generation P300.
The furnace is equipped with numerous Ivoclar Vivadent programs, which are coordinated with materials such as IPS e.max, IPS d.SIGN, IPS InLine and IPS Empress, to ensure immediate use of the furnace without programming. Depending on the scope of the application, the user can select between different operating modes (normal, protected and production).
Furthermore, the Programat P310 is equipped with the QTK2 muffle technology, which is responsible for the homogeneous heat distribution in the firing chamber, leading to optimum firing results and a prolonged life cycle of the heating element. Finally, the new vacuum pump control system with double valve technology ensures noiseless and power-saving operation.
Advantages:
Colour touch screen and proven membrane-sealed keypad
Easy operation thanks to large icons
QTK2 muffle technology with SiC bottom reflector
Power-saving technology
OSD display
Remote diagnostics via Internet, e-mail and data log files
Selection of three different operating modes (normal, protected, production)
Integrated tong holder
300 individual firing programs
Double valve vacuum technology
With its compact design, the Programat P310 focuses on the essentials and is therefore the optimal furnace for the daily lab routine.
Thanks to the new colour touch screen and the proven membrane-sealed keypad, this furnace has become even simpler to operate than those of the previous generation P300.
The furnace is equipped with numerous Ivoclar Vivadent programs, which are coordinated with materials such as IPS e.max, IPS d.SIGN, IPS InLine and IPS Empress, to ensure immediate use of the furnace without programming. Depending on the scope of the application, the user can select between different operating modes (normal, protected and production).
Furthermore, the Programat P310 is equipped with the QTK2 muffle technology, which is responsible for the homogeneous heat distribution in the firing chamber, leading to optimum firing results and a prolonged life cycle of the heating element. Finally, the new vacuum pump control system with double valve technology ensures noiseless and power-saving operation.
Advantages:
Colour touch screen and proven membrane-sealed keypad
Easy operation thanks to large icons
QTK2 muffle technology with SiC bottom reflector
Power-saving technology
OSD display
Remote diagnostics via Internet, e-mail and data log files
Selection of three different operating modes (normal, protected, production)
Integrated tong holder
300 individual firing programs
Double valve vacuum technology
$
2,388.00
Ivoclar Vivadent Programat EP 3000/G2 press furnaces
The new generation of the EP 3000 is the all-rounder in the laboratory. The combi furnace may be used as both a press furnace and a ceramic furnace.
The new design of the membrane-sealed keypad in combination with the monochromatic display provides for even simpler and language-independent operation. Due to the integrated Power Saving Technology, the energy consumption in the stand-by mode can be reduced by up to 40 %. This saves money and is friendly to the environment
In addition to various new features, the EP 3000 also convinces users with tried-and-tested functions, such as the Crack Detection System (CDS). This system automatically identifies cracks in the investment ring and immediately lessens the press power, if required. Additionally, the furnace can be calibrated fully automatically and very precisely in two temperature ranges using the ATK 2 automatic double-range temperature calibration.
Advantages:
Integrated special programs for IPS e.max Press Multi ingots.
The QTK muffle technology enables homogeneous heat irradiation and provides for optimum press and firing results.
The electronically controlled press drive allows very esthetic press results to be achieved and does not require compressed air.
CDS – Crack Detection System: Immediately interrupts the press process if a crack in the investment ring occurs.
Easy, extremely precise and automatic temperature calibration (ATK 2) at two temperature points
Removable furnace head for easy transportation and maintenance.
Broad range of programs (20 individual press programs, 300 individual firing programs).
USB interface for software updates via PC/laptop.
The new design of the membrane-sealed keypad in combination with the monochromatic display provides for even simpler and language-independent operation. Due to the integrated Power Saving Technology, the energy consumption in the stand-by mode can be reduced by up to 40 %. This saves money and is friendly to the environment
In addition to various new features, the EP 3000 also convinces users with tried-and-tested functions, such as the Crack Detection System (CDS). This system automatically identifies cracks in the investment ring and immediately lessens the press power, if required. Additionally, the furnace can be calibrated fully automatically and very precisely in two temperature ranges using the ATK 2 automatic double-range temperature calibration.
Advantages:
Integrated special programs for IPS e.max Press Multi ingots.
The QTK muffle technology enables homogeneous heat irradiation and provides for optimum press and firing results.
The electronically controlled press drive allows very esthetic press results to be achieved and does not require compressed air.
CDS – Crack Detection System: Immediately interrupts the press process if a crack in the investment ring occurs.
Easy, extremely precise and automatic temperature calibration (ATK 2) at two temperature points
Removable furnace head for easy transportation and maintenance.
Broad range of programs (20 individual press programs, 300 individual firing programs).
USB interface for software updates via PC/laptop.
$
4,125.00
Ivoclar Vivadent Programat P700/G2 Ceramic Furnace
The Programat P700 of the second generation is an absolute highlight among ceramic furnaces.
The newly added features include the integrated Power Saving Technology, which reduces the power consumption in the stand-by mode by up to 40%, and the modern user interface with coloured icons. Additionally, the furnace is equipped with voice output. The user obtains useful information in 13 different languages. The integrated Cooling Shock Protection (CSP) with a specially developed opening and cooling process prevents the formation of tension and cracks within the ceramic.
The Programat P700 can display coloured digital patient and tooth images and features an integrated MP3 player. The optical operating status display informs the user about the current status of the furnace even from a large distance. The furnace is equipped with the QTK heating muffle technology, which enables optimum firing results.
Advantages
The QTK muffle technology enables homogeneous heat irradiation and optimum firing results.
Automatic temperature calibration (ATK2 double-range calibration)
OSD operating status display
Colour display with touch function and tried-and-tested membrane-sealed keypad
120 preset Ivoclar Vivadent programs and 700 individual programs
CSP function (Cooling Shock Protection)
The TSP function (Thermo Shock Protection) prevents thermal shock of the ceramic if the furnace is heated too quickly.
4 USB connections, Ethernet interface, integrated card reader for image files
Connector socket for stereo speakers
The newly added features include the integrated Power Saving Technology, which reduces the power consumption in the stand-by mode by up to 40%, and the modern user interface with coloured icons. Additionally, the furnace is equipped with voice output. The user obtains useful information in 13 different languages. The integrated Cooling Shock Protection (CSP) with a specially developed opening and cooling process prevents the formation of tension and cracks within the ceramic.
The Programat P700 can display coloured digital patient and tooth images and features an integrated MP3 player. The optical operating status display informs the user about the current status of the furnace even from a large distance. The furnace is equipped with the QTK heating muffle technology, which enables optimum firing results.
Advantages
The QTK muffle technology enables homogeneous heat irradiation and optimum firing results.
Automatic temperature calibration (ATK2 double-range calibration)
OSD operating status display
Colour display with touch function and tried-and-tested membrane-sealed keypad
120 preset Ivoclar Vivadent programs and 700 individual programs
CSP function (Cooling Shock Protection)
The TSP function (Thermo Shock Protection) prevents thermal shock of the ceramic if the furnace is heated too quickly.
4 USB connections, Ethernet interface, integrated card reader for image files
Connector socket for stereo speakers
$
2,784.00
Ivoclar Vivadent Programat EP 5000/G2 press furnaces
Description:
The Programat EP 5000 is the highlight among the press furnaces. It sets new standards for dental press furnaces.
The second generation of the Programat EP 5000 Combi furnace is easy to operate – thanks to its graphic high-resolution colour display with the convenient touch screen function and the proven membrane-sealed keypad. During the firing process, the operating status indicator informs users about the current status from heating up until cooling. The energy consumption in the stand-by mode can be reduced by up to 40 percent due to the integrated power-saving function.
The new press drive with the Intelligent Press Function enables up to 45 % quicker results, particularly for press ceramics. A new feature of the furnace is the Crack Detection System (CDS), which recognizes any possible cracks in the investment ring at an early stage. In such cases, the furnace ends the press procedure in due time.
Advantages:
Integrated programs for IPS e.max Press Multi ingots.
The modern operating field with the large, clearly-arranged colour touch-display permits easy, intuitive operation.
Intelligent Press Function enables up to 45 % quicker press results
CDS – Crack Detection System: Immediately interrupts the press process if a crack in the investment ring occurs.
Homogeneous heat irradiation thanks to the QTK heating muffle technology
Integrated power saving technology saves money and is friendly to the environment
The electronically controlled press drive allows very esthetic press results and does not require compressed air.
During the firing process, the OSD operating status indicator informs users about the current status of the furnace (heating, cooling, error messages, etc.).
Easy, extremely precise and automatic temperature calibration (ATK 2) at two temperature points
USB interfaces for software updates as well as printer, PC, or memory stick connection.
TSP (Thermo Shock Protection) and CSP (Cooling Shock Protection) functions
The Programat EP 5000 is the highlight among the press furnaces. It sets new standards for dental press furnaces.
The second generation of the Programat EP 5000 Combi furnace is easy to operate – thanks to its graphic high-resolution colour display with the convenient touch screen function and the proven membrane-sealed keypad. During the firing process, the operating status indicator informs users about the current status from heating up until cooling. The energy consumption in the stand-by mode can be reduced by up to 40 percent due to the integrated power-saving function.
The new press drive with the Intelligent Press Function enables up to 45 % quicker results, particularly for press ceramics. A new feature of the furnace is the Crack Detection System (CDS), which recognizes any possible cracks in the investment ring at an early stage. In such cases, the furnace ends the press procedure in due time.
Advantages:
Integrated programs for IPS e.max Press Multi ingots.
The modern operating field with the large, clearly-arranged colour touch-display permits easy, intuitive operation.
Intelligent Press Function enables up to 45 % quicker press results
CDS – Crack Detection System: Immediately interrupts the press process if a crack in the investment ring occurs.
Homogeneous heat irradiation thanks to the QTK heating muffle technology
Integrated power saving technology saves money and is friendly to the environment
The electronically controlled press drive allows very esthetic press results and does not require compressed air.
During the firing process, the OSD operating status indicator informs users about the current status of the furnace (heating, cooling, error messages, etc.).
Easy, extremely precise and automatic temperature calibration (ATK 2) at two temperature points
USB interfaces for software updates as well as printer, PC, or memory stick connection.
TSP (Thermo Shock Protection) and CSP (Cooling Shock Protection) functions
$
4,995.00
Ivoclar Vivadent Programat CS2 Ceramic Furnace
Description:
The second generation of the Programat CS series is the ideal ceramic and crystallization furnace for dentists.
The device has been specially developed for the crystallization of IPS e.max CAD restorations. The Programat CS2 is easily operated by means of the new colour touch screen and the proven membrane-sealed keypad. It is furthermore equipped with 20 individual programs as well as predefined Ivoclar Vivadent programs, such as the Speed program, which crystallizes IPS e.max CAD restorations in less than 15 minutes.
The QTK2 muffle technology is responsible for even more homogeneous heat distribution in the firing chamber, leading to optimum firing results and a prolonged life cycle of the heating element. Additionally, the new vacuum pump control system with double valve technology ensures noiseless and power-saving operation of the vacuum pump.
Advantages:
Colour touch screen and proven membrane-sealed keypad
QTK2 muffle technology with SiC bottom reflector
Easy operation; specially developed for use in the dental practice
Automatic double-range temperature calibration (ATK2)
Remote diagnostics via Internet, e-mail and data log files
Software updates via USB flash drive
Power-saving technology
OSD display
Integrated tong holder
Double valve vacuum technology
The second generation of the Programat CS series is the ideal ceramic and crystallization furnace for dentists.
The device has been specially developed for the crystallization of IPS e.max CAD restorations. The Programat CS2 is easily operated by means of the new colour touch screen and the proven membrane-sealed keypad. It is furthermore equipped with 20 individual programs as well as predefined Ivoclar Vivadent programs, such as the Speed program, which crystallizes IPS e.max CAD restorations in less than 15 minutes.
The QTK2 muffle technology is responsible for even more homogeneous heat distribution in the firing chamber, leading to optimum firing results and a prolonged life cycle of the heating element. Additionally, the new vacuum pump control system with double valve technology ensures noiseless and power-saving operation of the vacuum pump.
Advantages:
Colour touch screen and proven membrane-sealed keypad
QTK2 muffle technology with SiC bottom reflector
Easy operation; specially developed for use in the dental practice
Automatic double-range temperature calibration (ATK2)
Remote diagnostics via Internet, e-mail and data log files
Software updates via USB flash drive
Power-saving technology
OSD display
Integrated tong holder
Double valve vacuum technology
$
2,290.00
Ivoclar Vivadent Programat S1 Sintering Furnace
Description:
The Programat S1 is a light-weight and compact sintering furnace for the sintering of frameworks made of IPS e.max ZirCAD and other ZrO2 materials. New with software-version V2.0: “75 minutes is all it takes”!
With the Programat S1, long sintering processes are a thing of the past. It sinters single-tooth frameworks of zirconium oxide material in 75 minutes and zirconium bridge frameworks up to four units in 90 minutes. Conventional sinter furnaces usually take five to eight hours for this process. What does a short sintering process mean for the laboratory? Crowns and bridges with a zirconium oxide framework can be fabricated in one work day (including veneer). The short sintering process does not jeopardize the high material strength and accuracy of fit of the restoration, as scientific investigations have shown. Furthermore, less power is used.
Advantages
Single-tooth frameworks can be sintered in 75 minutes and bridge frameworks in 90 minutes
Speed programs for full anatomic restorations with higher translucency
Simple and language-independent operation thanks to the proven combination of membrane-sealed keypad and graphic display
Power Saving Technology: Compared with conventional sintering furnaces, up to 64% of the energy is saved with one sintering process
Compact design based on the Programat platform
Only 28 kg
Calibration possibility
OSD operating status display
Comfortable loading of the sintering chamber thanks to the furnace head tilting upwards
Removable furnace head for maintenance purposes
USB connection – easy software updates
Remote control via PC/laptop by means of PrograBase2 software
The Programat S1 is a light-weight and compact sintering furnace for the sintering of frameworks made of IPS e.max ZirCAD and other ZrO2 materials. New with software-version V2.0: “75 minutes is all it takes”!
With the Programat S1, long sintering processes are a thing of the past. It sinters single-tooth frameworks of zirconium oxide material in 75 minutes and zirconium bridge frameworks up to four units in 90 minutes. Conventional sinter furnaces usually take five to eight hours for this process. What does a short sintering process mean for the laboratory? Crowns and bridges with a zirconium oxide framework can be fabricated in one work day (including veneer). The short sintering process does not jeopardize the high material strength and accuracy of fit of the restoration, as scientific investigations have shown. Furthermore, less power is used.
Advantages
Single-tooth frameworks can be sintered in 75 minutes and bridge frameworks in 90 minutes
Speed programs for full anatomic restorations with higher translucency
Simple and language-independent operation thanks to the proven combination of membrane-sealed keypad and graphic display
Power Saving Technology: Compared with conventional sintering furnaces, up to 64% of the energy is saved with one sintering process
Compact design based on the Programat platform
Only 28 kg
Calibration possibility
OSD operating status display
Comfortable loading of the sintering chamber thanks to the furnace head tilting upwards
Removable furnace head for maintenance purposes
USB connection – easy software updates
Remote control via PC/laptop by means of PrograBase2 software
$
5,443.00
IvoBase Injector Injection Systems
Description:
IvoBase Injector permits a fully automated, controlled injection and polymerization procedure of special PMMA resins which are coordinated with the system. The chemical shrinkage of the resin is entirely compensated during polymerization ? thanks to the patented temperature control in the flask and the heater. This enables the fabrication of denture bases featuring high accuracy of fit and precision. The injector has been especially developed for the IvoBase material and permits excellent restorations. The IvoBase Injector can also be used for the tried-and-tested SR Ivocap material.
Advantages:
All-in-one" injector, quick and easy setting into operation possible
Controlled polymerization shrinkage for optimal accuracy of fit
No water and compressed air connection necessary (plug and play)
Compact, modern and ergonomic design; requires only a small space
OSD indicator: current operating status visible from a great distance
RMR key for a clear reduction of the residual monomer content
USB port for software updates via PC/Internet
Direct flask heating without water bath permits polymerization without annoying steam
High maintenance friendliness and easy replacement of the heating elements due to the removable cover
Versatile injector with various Ivoclar Vivadent and reserve programs
IvoBase Injector permits a fully automated, controlled injection and polymerization procedure of special PMMA resins which are coordinated with the system. The chemical shrinkage of the resin is entirely compensated during polymerization ? thanks to the patented temperature control in the flask and the heater. This enables the fabrication of denture bases featuring high accuracy of fit and precision. The injector has been especially developed for the IvoBase material and permits excellent restorations. The IvoBase Injector can also be used for the tried-and-tested SR Ivocap material.
Advantages:
All-in-one" injector, quick and easy setting into operation possible
Controlled polymerization shrinkage for optimal accuracy of fit
No water and compressed air connection necessary (plug and play)
Compact, modern and ergonomic design; requires only a small space
OSD indicator: current operating status visible from a great distance
RMR key for a clear reduction of the residual monomer content
USB port for software updates via PC/Internet
Direct flask heating without water bath permits polymerization without annoying steam
High maintenance friendliness and easy replacement of the heating elements due to the removable cover
Versatile injector with various Ivoclar Vivadent and reserve programs
$
3,881.00
Bluephase Style
Bluephase Style represents the latest in LED curing light technology. With patented Polywave technology to cure all dental materials, a newly designed light probe for easy access to posterior teeth and the option to be used cordless or corded, Bluephase Style provides the ultimate curing experience for you and your patients.
Bluephase Style has been designed with the end user in mind. With improvements such as its slim and lightweight design, the intuitive two button operation and the inductive charging system, you will wonder how you ever worked without it!
Advantages
Slim and ergonomic design makes it comfortable for all hands
Polywave LED with halogen like broadband spectrum of 385-515 nm
Newly designed light probe provides easy access to posterior teeth
Large treatment field due to 10mm light probe
Cordless or corded operation
Intuitive two-button operation
Energy efficient LED technology allows for continuous curing
Available in 3 colors (grey, pink and blue)
Bluephase Style has been designed with the end user in mind. With improvements such as its slim and lightweight design, the intuitive two button operation and the inductive charging system, you will wonder how you ever worked without it!
Advantages
Slim and ergonomic design makes it comfortable for all hands
Polywave LED with halogen like broadband spectrum of 385-515 nm
Newly designed light probe provides easy access to posterior teeth
Large treatment field due to 10mm light probe
Cordless or corded operation
Intuitive two-button operation
Energy efficient LED technology allows for continuous curing
Available in 3 colors (grey, pink and blue)
$
595.00
Bluephase® 20i
Bluephase-20i-title-pic
Bluephase® 20i
The battery-operated Bluephase 20i combines the high light intensity of 2,000 mW/cm2 in the Turbo program with a short curing time of 5 seconds for light and dark composites while being gentle to the pulp and the soft tissue.
The full capacity of Bluephase 20i is particularly useful when consistent and maximum performance is required, for instance when indirect all-ceramic restorations are placed or orthodontic brackets are bonded. Due to the high efficiency, high output and the integrated fan for continuous cooling, adhesively cemented IPS Empress and IPS e.max restorations are polymerized in no time.
Advantages
Very short curing times due to high light intensity
Polywave LED with halogen-like broadband spectrum from 385 to 515 nm
Suitable for all materials
Click & Cure for battery-independent emergency corded operation
Four programs for curing close to the pulp, high speed curing and low shrinkage
Internal fan allowing for continuous curing
Bluephase® 20i
The battery-operated Bluephase 20i combines the high light intensity of 2,000 mW/cm2 in the Turbo program with a short curing time of 5 seconds for light and dark composites while being gentle to the pulp and the soft tissue.
The full capacity of Bluephase 20i is particularly useful when consistent and maximum performance is required, for instance when indirect all-ceramic restorations are placed or orthodontic brackets are bonded. Due to the high efficiency, high output and the integrated fan for continuous cooling, adhesively cemented IPS Empress and IPS e.max restorations are polymerized in no time.
Advantages
Very short curing times due to high light intensity
Polywave LED with halogen-like broadband spectrum from 385 to 515 nm
Suitable for all materials
Click & Cure for battery-independent emergency corded operation
Four programs for curing close to the pulp, high speed curing and low shrinkage
Internal fan allowing for continuous curing
$
800.00
Bluephase G2
Bluephase-G2-title-image
Bluephase G2
The battery-operated Bluephase G2 LED curing light provides extraordinary reliability. With a light intensity of 1,200 mW/cm2, three proven programs and a rotatable light probe with a diameter of 10 mm, it is the classic among the Bluephase products.
Awards from renowned institutions are a testament to the success and high quality standard of Bluephase.
Advantages
polywave LED with halogen-like broadband spectrum from 385 to 515 nm
Suitable for all materials
Large treatment field due to 10-mm light probe
Click & Cure for battery-independent emergency corded operation
Three programs for curing close to the pulp, high speed curing and low shrinkage
Internal fan allowing for continuous curing
Bluephase G2
The battery-operated Bluephase G2 LED curing light provides extraordinary reliability. With a light intensity of 1,200 mW/cm2, three proven programs and a rotatable light probe with a diameter of 10 mm, it is the classic among the Bluephase products.
Awards from renowned institutions are a testament to the success and high quality standard of Bluephase.
Advantages
polywave LED with halogen-like broadband spectrum from 385 to 515 nm
Suitable for all materials
Large treatment field due to 10-mm light probe
Click & Cure for battery-independent emergency corded operation
Three programs for curing close to the pulp, high speed curing and low shrinkage
Internal fan allowing for continuous curing
$
650.00
Programat CS3
The Programat CS3 is the ideal ceramic and crystallization furnace for dentists with higher demands.
It has been especially developed for the crystallization of IPS e.max CAD restorations. The furnace is operated via the 7-inch colour touch screen with a specially developed operating concept for the dental practice and the well-proven membrane-sealed keypad. The Programat CS3 features over 30 individual programs and preset Ivoclar Vivadent programs, one of which is the Speed program which crystallizes IPS e.max CAD restorations in less than 15 minutes.
With the help of the patented Digital Shade Assistant (DSA) the selection of the tooth shade can be achieved instantly. The software compares the tooth to be analyzed with three pre-selected shade guide teeth in one image. A special image processing software recognizes the tooth to be analyzed and the three shade guide teeth. The best matching tooth shade will be displayed as a result on the furnace screen.
The proven QTK2 muffle technology ensures an even more homogenous heat distribution in the firing chamber. Optimal firing results are achieved and the life cycle of the heating element is prolonged. The new vacuum pump control system with double valve technology ensures noiseless and power-saving operation.
Benefits:
Firing and crystallization furnace with integrated DSA function for the digital analysis of the tooth shade.
Colour touch screen in combination with the proven membrane-sealed keypad.
Operating concept specially developed for the dental practice.
QTK2 muffle technology with SiC bottom reflector
Automatic double-range calibration (ATK2):
Integrated power-save function (Power-Save Technology)
OSD display
Programat WLAN Kit for wireless data transfer (software updates, PrograBase x 10)
Modern interfaces (USB, ethernet, SD card reader)
Double valve vacuum technology
It has been especially developed for the crystallization of IPS e.max CAD restorations. The furnace is operated via the 7-inch colour touch screen with a specially developed operating concept for the dental practice and the well-proven membrane-sealed keypad. The Programat CS3 features over 30 individual programs and preset Ivoclar Vivadent programs, one of which is the Speed program which crystallizes IPS e.max CAD restorations in less than 15 minutes.
With the help of the patented Digital Shade Assistant (DSA) the selection of the tooth shade can be achieved instantly. The software compares the tooth to be analyzed with three pre-selected shade guide teeth in one image. A special image processing software recognizes the tooth to be analyzed and the three shade guide teeth. The best matching tooth shade will be displayed as a result on the furnace screen.
The proven QTK2 muffle technology ensures an even more homogenous heat distribution in the firing chamber. Optimal firing results are achieved and the life cycle of the heating element is prolonged. The new vacuum pump control system with double valve technology ensures noiseless and power-saving operation.
Benefits:
Firing and crystallization furnace with integrated DSA function for the digital analysis of the tooth shade.
Colour touch screen in combination with the proven membrane-sealed keypad.
Operating concept specially developed for the dental practice.
QTK2 muffle technology with SiC bottom reflector
Automatic double-range calibration (ATK2):
Integrated power-save function (Power-Save Technology)
OSD display
Programat WLAN Kit for wireless data transfer (software updates, PrograBase x 10)
Modern interfaces (USB, ethernet, SD card reader)
Double valve vacuum technology
$
3,100.00
Programat S1 1600
The exceptional sintering furnace.
The Programat S1 1600 is a compact and lightweight furnace for the sintering of zirconia. Its cutting-edge heating elements enable firing temperatures up to 1600˚C, ensure homogenous heat distribution, and are designed to endure intensive everyday use and have a long service life. Most important of all, it produces beautiful and accurately fitting restorations quickly.
Exceptional efficiency and ease of use
This furnace was designed in conjunction with IPS e.max ZirCAD and Weiland Zenostar® materials and allows users to select from its pre-set programs or create individual ones. Urgent cases can now be completed in a working day as it can sinter single unit copings in as little as 75 minutes and up to four unit bridges in 90 minutes*. Efficiency is increased both in terms of output through speed sintering and energy with decreased program times and its proven power saving technology.
Space can also be a factor in choosing a furnace, which is why it was designed to have the smallest footprint possible. While conventional sintering furnaces can weigh up to 220 lbs, the Programat S1 1600 comes in at 15.4” wide and 62 lbs, leaving ample working space.
Additional features such as optical status display, membrane-sealed keypad, USB connection, in-lab calibration, and the only removable sintering furnace head on the market make it a quality choice for discerning dental laboratories.
Features:
Sintering up to 1,600˚C for maximum translucency (when recommended by ZrO₂ manufacturer)
Speed sintering of single unit copings in 75 minutes and up to four unit bridges in 90 minutes*
Integrated speed programs for fully anatomical restorations with high translucency
Proven simple operation with user-friendly graphic displays and a membrane-sealed keypad
Power Saving Technology
In-lab calibration
OSD (Optical Status Display)
Remote control via PC/tablet via PrograBase3 software
Remote diagnostics
Free software upgrades
2 year warranty
Width of 15.4” and weight of 62 lbs
118-240V electrical connectivity
The Programat S1 1600 is a compact and lightweight furnace for the sintering of zirconia. Its cutting-edge heating elements enable firing temperatures up to 1600˚C, ensure homogenous heat distribution, and are designed to endure intensive everyday use and have a long service life. Most important of all, it produces beautiful and accurately fitting restorations quickly.
Exceptional efficiency and ease of use
This furnace was designed in conjunction with IPS e.max ZirCAD and Weiland Zenostar® materials and allows users to select from its pre-set programs or create individual ones. Urgent cases can now be completed in a working day as it can sinter single unit copings in as little as 75 minutes and up to four unit bridges in 90 minutes*. Efficiency is increased both in terms of output through speed sintering and energy with decreased program times and its proven power saving technology.
Space can also be a factor in choosing a furnace, which is why it was designed to have the smallest footprint possible. While conventional sintering furnaces can weigh up to 220 lbs, the Programat S1 1600 comes in at 15.4” wide and 62 lbs, leaving ample working space.
Additional features such as optical status display, membrane-sealed keypad, USB connection, in-lab calibration, and the only removable sintering furnace head on the market make it a quality choice for discerning dental laboratories.
Features:
Sintering up to 1,600˚C for maximum translucency (when recommended by ZrO₂ manufacturer)
Speed sintering of single unit copings in 75 minutes and up to four unit bridges in 90 minutes*
Integrated speed programs for fully anatomical restorations with high translucency
Proven simple operation with user-friendly graphic displays and a membrane-sealed keypad
Power Saving Technology
In-lab calibration
OSD (Optical Status Display)
Remote control via PC/tablet via PrograBase3 software
Remote diagnostics
Free software upgrades
2 year warranty
Width of 15.4” and weight of 62 lbs
118-240V electrical connectivity
$
6,200.00
Ivoclar viveadent Programat P710
The Programat® P710 leads ceramic furnaces into the future with its unique cutting edge technology.
The intelligent furnace features groundbreaking image processing software called DSA (Digital Shade Assistant) which utilizes pictures of the tooth to be restored with three shade guide teeth and can then analyze the shade of the cervical, middle, and incisal sections of the tooth. This helps with proper material shade selection and detailed shading which results in natural, life-like results.
It also includes the Gloss Adjustment Assistant which allows the technician to increase hold time in glaze programs up to 100% with the touch of a button. It returns to the original settings after each firing and saves the time of setting individual programs.
Programat’s proven AIM™ infrared technology uses a thermal imaging camera to analyze the restorations and automatically control the pre-drying and closing times based on the exact time when the moisture in the ceramic has evaporated. This helps to greatly reduce the risk of cracks and porosity and increase process reliability and firing quality. Furthermore, it can also result in a time savings up to 20% depending on the size and number of objects and surface moisture.
Benefits:
Three-step heating and two-step cooling programs
Multimedia functionality which supports video, MP3 player, images and PDF
QTK2 muffle technology with SiC bottom reflector for the utmost in even heat distribution
Automatic double-range temperature calibration (ATK2)
Operating Status Display (OSD) which indicates both operating mode and progress
Power Saving Technology
Power Fail Save System
The intelligent furnace features groundbreaking image processing software called DSA (Digital Shade Assistant) which utilizes pictures of the tooth to be restored with three shade guide teeth and can then analyze the shade of the cervical, middle, and incisal sections of the tooth. This helps with proper material shade selection and detailed shading which results in natural, life-like results.
It also includes the Gloss Adjustment Assistant which allows the technician to increase hold time in glaze programs up to 100% with the touch of a button. It returns to the original settings after each firing and saves the time of setting individual programs.
Programat’s proven AIM™ infrared technology uses a thermal imaging camera to analyze the restorations and automatically control the pre-drying and closing times based on the exact time when the moisture in the ceramic has evaporated. This helps to greatly reduce the risk of cracks and porosity and increase process reliability and firing quality. Furthermore, it can also result in a time savings up to 20% depending on the size and number of objects and surface moisture.
Benefits:
Three-step heating and two-step cooling programs
Multimedia functionality which supports video, MP3 player, images and PDF
QTK2 muffle technology with SiC bottom reflector for the utmost in even heat distribution
Automatic double-range temperature calibration (ATK2)
Operating Status Display (OSD) which indicates both operating mode and progress
Power Saving Technology
Power Fail Save System
$
3,500.00
Ivoclar Vivadent PrograMill One
PrograMill One is the smallest smart 5-axis milling machine worldwide. It combines industrial production quality with high precision and modern design. The machine is wireless and can be placed anywhere within the laboratory and operated via an app from a tablet or smartphone. This new interplay between man and machine means it can be perfectly integrated within the laboratory. This is Digital Dentistry 4.0.
5XT – the next generation of processing
The innovative 5-axis turn-milling technology (5XT) means the block which is being processed moves around the tool. The infeed remains consistent and the tool never leaves the workpiece. This enables short machining times while keeping tool wear low. The result is an outstanding surface quality and excellent fit of the restorations. Depending on the materials and indications, individual validated machining strategies are used, reducing rework to a minimum.
High automation and comfort
A camera integrated within the PrograMill One automatically records all information on materials and tools. This makes the use of different materials extremely easy and material loading very convenient. Material, size, shade and translucency are automatically read in by means of the Data Matrix Code which is printed on the block. The OSD (Optical Status Display) visually informs the user about the current operating status.
Your benefits
Outstanding surface quality
Excellent fit
Short processing times
Features
5-axis turn-milling technology (5XT)
Quick and precise due to 5XT
5-way material changer and 8-position tool changer
Integrated camera for a high level of automation
Easy and wireless operation via an app
Optical Status Display
Fully automatic material and tool management
Indications
Inlays, onlays, veneers
Partial crowns, crowns
Bridges (up to 45 mm block length)
Materials
IPS e.max CAD
IPS e.max ZirCAD
IPS Empress CAD
Telio CAD
PrograMill One App
PrograMill One is wireless and can be operated from anywhere within the laboratory via an app from a tablet or smartphone. This way you are always informed of the machine’s current status.
App Features
Order management: Order list in the overview, Current processing status, Control of the 5-axis block changer
Tool management: Display of tool status, Control of the 8-position tool changer
Machine management: Overview of machine data, Machine status, Filter unit status
5XT – the next generation of processing
The innovative 5-axis turn-milling technology (5XT) means the block which is being processed moves around the tool. The infeed remains consistent and the tool never leaves the workpiece. This enables short machining times while keeping tool wear low. The result is an outstanding surface quality and excellent fit of the restorations. Depending on the materials and indications, individual validated machining strategies are used, reducing rework to a minimum.
High automation and comfort
A camera integrated within the PrograMill One automatically records all information on materials and tools. This makes the use of different materials extremely easy and material loading very convenient. Material, size, shade and translucency are automatically read in by means of the Data Matrix Code which is printed on the block. The OSD (Optical Status Display) visually informs the user about the current operating status.
Your benefits
Outstanding surface quality
Excellent fit
Short processing times
Features
5-axis turn-milling technology (5XT)
Quick and precise due to 5XT
5-way material changer and 8-position tool changer
Integrated camera for a high level of automation
Easy and wireless operation via an app
Optical Status Display
Fully automatic material and tool management
Indications
Inlays, onlays, veneers
Partial crowns, crowns
Bridges (up to 45 mm block length)
Materials
IPS e.max CAD
IPS e.max ZirCAD
IPS Empress CAD
Telio CAD
PrograMill One App
PrograMill One is wireless and can be operated from anywhere within the laboratory via an app from a tablet or smartphone. This way you are always informed of the machine’s current status.
App Features
Order management: Order list in the overview, Current processing status, Control of the 5-axis block changer
Tool management: Display of tool status, Control of the 8-position tool changer
Machine management: Overview of machine data, Machine status, Filter unit status
$
18,900.00
Ivoclar Vivadent Programat CS4
Programat CS4 is the ideal sintering, crystallization and glazing furnace for dental practices.
Programat CS4 is a compact multifunction furnace for dental practices. It is designed for sintering zirconia restorations, e.g. IPS e.max ZirCAD, using a temperature of up to 1,600 °C. The furnace can also be employed as a glazing and crystallization furnace for IPS e.max CAD and IPS Empress CAD restorations. The speed sintering program allows zirconia restorations to be manufactured directly in the dental practice in a single session.
A clearly arranged membrane-sealed keypad with graphic display enables easy operation. Both pre-set and individual programs for third-party materials are available. Programat CS4 is a stand-alone furnace that features an open system.
Advantages:
Fast sintering of IPS e.max ZirCAD
Crystallization of IPS e.max CAD
Glaze program for IPS e.max ZirCAD, IPS e.max CAD and IPS Empress CAD
High processing capacity (up to six units)
Open system
Simple and language-independent operation due to the proven combination of membrane-sealed keypad and graphic display
Power Saving Technology
Compact design
Possibility of on-site temperature calibration
OSD (Optical Status Display)
Remote control via PC/laptop by means of PrograBase3 software
Programat CS4 is a compact multifunction furnace for dental practices. It is designed for sintering zirconia restorations, e.g. IPS e.max ZirCAD, using a temperature of up to 1,600 °C. The furnace can also be employed as a glazing and crystallization furnace for IPS e.max CAD and IPS Empress CAD restorations. The speed sintering program allows zirconia restorations to be manufactured directly in the dental practice in a single session.
A clearly arranged membrane-sealed keypad with graphic display enables easy operation. Both pre-set and individual programs for third-party materials are available. Programat CS4 is a stand-alone furnace that features an open system.
Advantages:
Fast sintering of IPS e.max ZirCAD
Crystallization of IPS e.max CAD
Glaze program for IPS e.max ZirCAD, IPS e.max CAD and IPS Empress CAD
High processing capacity (up to six units)
Open system
Simple and language-independent operation due to the proven combination of membrane-sealed keypad and graphic display
Power Saving Technology
Compact design
Possibility of on-site temperature calibration
OSD (Optical Status Display)
Remote control via PC/laptop by means of PrograBase3 software
$
7,900.00
Ivoclar Vivadent Bluephase Style M8
The Bluephase Style M8 is on an economical mission:
The cordless LED curing light offers a light intensity of 800 mW/cm2 for short curing times and ideally fits the hand of every woman or man due to its award-winning design.
An attractive price/performance ratio combined with proven product features, such as the shortened 10-mm light probe, offer an economic light-curing solution.
bluephase_style_M8_0103
Advantages
Proven Bluephase product quality and economic purchasing price
Large treatment field due to shortened, autoclavable 10-mm light probe
Ergonomic, well balanced design for fatigue-proof operation
Intuitive handling with 2-button operation
Selection of four different curing times provides time-saving and reliable curing results
Equipped with a high-performance lithium-polymer-battery using inductive charging technology for long operating capacity and optimum hygiene
Indications
Suitable for the polymerization of common light-curing dental materials in the wavelength range of 430 - 490 nm
These materials include composites, bonding agents/adhesives, bases, liners, fissure sealants, temporaries as well as luting materials for brackets and indirect restorations, such as ceramic inlays\
The cordless LED curing light offers a light intensity of 800 mW/cm2 for short curing times and ideally fits the hand of every woman or man due to its award-winning design.
An attractive price/performance ratio combined with proven product features, such as the shortened 10-mm light probe, offer an economic light-curing solution.
bluephase_style_M8_0103
Advantages
Proven Bluephase product quality and economic purchasing price
Large treatment field due to shortened, autoclavable 10-mm light probe
Ergonomic, well balanced design for fatigue-proof operation
Intuitive handling with 2-button operation
Selection of four different curing times provides time-saving and reliable curing results
Equipped with a high-performance lithium-polymer-battery using inductive charging technology for long operating capacity and optimum hygiene
Indications
Suitable for the polymerization of common light-curing dental materials in the wavelength range of 430 - 490 nm
These materials include composites, bonding agents/adhesives, bases, liners, fissure sealants, temporaries as well as luting materials for brackets and indirect restorations, such as ceramic inlays\
$
855.00
Ivoclar Vivadent Bluephase Style 20i
The Bluephase Style 20i is the powerful LED for every use.
The cordless high-performance LED curing light combines maximum power of up to 2,000 mW/cm2 in the Turbo mode with extremely short curing times starting from only 5 seconds supporting timesaving and economic working procedures during everyday practice.
Especially suitable for indirect restorations
Depending on the material thickness, shade and opacity of an indirect restoration, the quantity of light reaching the luting composite can be significantly reduced. Especially for this indication, the high light intensity of Bluephase Style 20i is of decisive advantage. Consequently, enough energy penetrates through the crown or inlay even with high-quality all-ceramic restorations - for a sufficient and reliable curing of the light or dual-curing composite.
Advantages
Very short curing times due to high light intensity of 2'000 mW/cm2
Polywave LED with halogen-like broadband spectrum
Suitable for all materials
Click & Cure for battery-independent emergency corded operation
Equipped with a high-performance lithium-polymer-battery using inductive charging technology for long operating capacity and optimum hygiene
Indications
Suitable for the fast polymerization of all light-curing dental materials in the wavelength range of 385 - 515 nm
These materials include composites, bonding agents/adhesives, bases, liners, fissure sealants, temporaries as well as luting materials for brackets and indirect restorations, such as ceramic inlays
The cordless high-performance LED curing light combines maximum power of up to 2,000 mW/cm2 in the Turbo mode with extremely short curing times starting from only 5 seconds supporting timesaving and economic working procedures during everyday practice.
Especially suitable for indirect restorations
Depending on the material thickness, shade and opacity of an indirect restoration, the quantity of light reaching the luting composite can be significantly reduced. Especially for this indication, the high light intensity of Bluephase Style 20i is of decisive advantage. Consequently, enough energy penetrates through the crown or inlay even with high-quality all-ceramic restorations - for a sufficient and reliable curing of the light or dual-curing composite.
Advantages
Very short curing times due to high light intensity of 2'000 mW/cm2
Polywave LED with halogen-like broadband spectrum
Suitable for all materials
Click & Cure for battery-independent emergency corded operation
Equipped with a high-performance lithium-polymer-battery using inductive charging technology for long operating capacity and optimum hygiene
Indications
Suitable for the fast polymerization of all light-curing dental materials in the wavelength range of 385 - 515 nm
These materials include composites, bonding agents/adhesives, bases, liners, fissure sealants, temporaries as well as luting materials for brackets and indirect restorations, such as ceramic inlays
$
690.00